BRVJF - 5W045A GLOSS BROWN
- MSDS: BRVJF
- Manufacturer: SPRAYON PRODUCTS
- Product Name: 5W045A GLOSS BROWN
- National Stock Number: 8010-00F029026
Product Identification
Product ID:5W045A GLOSS BROWN
MSDS Date:06/01/1992
FSC:8010
NIIN:00F029026
MSDS Number: BRVJF
Responsible Party
BEDFORD HTS, OH 44146-1310
US
Emergency Phone: 216-292-7400
Info Phone: 216-292-7400
Cage: 09800
Contractor
Telephone: 216-292-7400 OR 216-595-8634
Cage: 09800
Ingredients
PROPANE
CAS: 74-98-6
RTECS: TX2275000
Fraction By Weight: 14%
OSHA PEL 1000 PPM
ACGIH TLV: SIMPLE ASPHYXIANT
ISOBUTANE, 2-METHYLPROPANE
CAS: 75-28-5
RTECS: TZ4300000
Fraction By Weight: 14%
OSHA PEL 1800 MG/CUM
ACGIH TLV: 1000 PPM
TOLUENE
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: 9%
OSHA PEL 200 PPM/150 STEL
ACGIH TLV: 50 PPM; 9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
XYLENE, DIMETHYLBENZENE, XYLOL
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: 14%
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM, SKIN
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
ACETONE; DIMETHYL KETONE
CAS: 67-64-1
RTECS: AL3150000
Fraction By Weight: 26%
OSHA PEL 1000PPM
ACGIH TLV: 750PPM/1000STEL;9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
ETHYL 3-ETHOXYPROPIONATE
CAS: 763-69-9
RTECS: UF3325000
Fraction By Weight: 4%
PERCENT BY WEIGHT
RTECS: 9999999VO
Fraction By Weight: 81%
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:IRRITATION OF EYES, SKIN & RESPIRATORY
SYSTEM. NERVOUS SYSTEM DEPRESSION. PERMANENT BRAIN & NERVOUS SYSTEM
DAMAGE. MAY CAUSE ADVERSE EFFECTS TO LIVER, URINARY, BLOOD FORMING,
CARDIO-VASCULAR & REPRODU CTIVE SYSTEMS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: HEADACHE, DIZZINESS, NAUSEA, LOSS
OF COORDINATION, UNCONSCIOUSNESS & DEATH. EYES/SKIN: REDNESS,
ITCHING & BURNING SENSATION.
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR & RESTORE BREATHING. KEEP
WARM & QUIET. SKIN: WASH W/SOAP & WATER. EYES: FLUSH W/WATER FOR 15
MINS. INGESTION: OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point Method:PMCC
Flash Point:<0F
Lower Limits:0.7%
Upper Limits:7%
Extinguishing Media:CO2, DRY CHEMICAL, FOAM
Fire Fighting Procedures:WEAR FULL PROTECTIVE EQUIPMENT INCLUDING
SELF-CONTAINED BREATHING APPARATUS. WATER MAY BE USED TO COOL
CLOSED CONTAINERS. FOG NOZZLES ARE PREFERABLE.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE DUE TO
PRESSURE BUILD-UP, POSSIBLE AUTOIGNITION WHEN EXPOSED TO EXTREME
HEAT. CONTENTS ARE EXTREMELY FLAMMABLE.
Accidental Release
Spill Release Procedures:REMOVE ALL IGNITION SOURCES. VENTILATE AREA.
REMOVE W/INERT ABSORBENT.
Handling
Handling and Storage Precautions:USE APPROVED BONDING & GROUNDING
PROCEDURES. CONTENTS UNDER PRESSURE. DON'T PUNCTURE, INCINERATE, OR
EXPOSE TO TEMPERATURES ABOVE 120F. DON'T SMOKE.
Other Precautions:USE ONLY W/ADEQUATE VENTILATION. AVOID BREATHING
VAPOR/SPRAY MIST. AVOID SKIN & EYE CONTACT. DON'T TAKE INTERNALLY.
KEEP OUT OF REACH OF CHILDREN. INTENTIONAL MISUSE BY DELIBERATELY
CONCENTRATING & IN HALING CONTENTS CAN BE HARMFUL OR FATAL.
Exposure Controls
Respiratory Protection:USE PROPERLY FITTED ORGANIC VAPOR/PARTICULATE
RESPIRATOR APPROVED BY NIOSH/MSHA. WHEN SANDING OR ABRADING THE
DRIED FILM, WEAR A DUST/MIST RESPIRATOR FOR DUST WHICH MAY BE
GENERATED FROM PRODUCT, UNDE RLYING PAINT, OR ABRASIVE. SEE SUPPL.
Ventilation:LOCAL EXHAUST PREFERABLE. GENERAL EXHAUST ACCEPTABLE WHEN
EXPOSURE LIMITS ARE EXCEEDED
Protective Gloves:RECOMMENDED
Eye Protection:SAFETY GLASSES W/UNPERFORATED SIDESHIELD
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health
THIS COATING MAY CONTAIN MATERIALS CLASSIFIED AS NUISANCE PARTICULATES
WHICH MAY BE PRESENT AT HAZARDOUS LEVELS ONLY DURING SANDING OR
ABRADING OF THE DRIED FILM.
Chemical Properties
Boiling Pt:B.P. Text:<0-360F
Vapor Density:>1
Evaporation Rate & Reference:FASTER THAN ETHER
Appearance and Odor:BROWN PAINT
Percent Volatiles by Volume:>75
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAME, PILOT LIGHTS,
HEATERS, SUNLIGHT, STOVES, ELECTRIC TOOLS, APPLICANCES & OTHER
IGNITION SOURCES
Hazardous Decomposition Products:CO & CO2
Disposal
Waste Disposal Methods:WASTE FROM PRODUCT MAY BE HAZARDOUS AS DEFINED
UNDER RCRA. WASTE MUST BE TESTED FOR IGNITABILITY TO DETERMINE
APPLICABLE EPA HAZARDOUS WASTE NUMBERS. DON'T INCINERATE.
DEPRESSURIZE CONTAINER. DISPOSE OF IN ACCORDANCE W/FEDERAL, STATE
& LOCAL LAWS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.